The WT-D5800 is a PLL-synthesizer-controlled double super-heterodyne diversity receiver designed to be used with a UHF wireless system. Employing a digital reception system that is virtually immune to interference and noise, the WT-D5800 Wireless Receiver ensures stable radio signal reception. Additionally, this receiver features a host of convenient functions, such as external equipment control by way of contact outputs, and system status monitoring by way of its maintenance software, enabling highly reliable operation.
- Power Source: AC mains (supplied AC adapter must be used)
- Current Consumption: 350mA (13.5V)
- Frequency Range: EC4 / EC7 ver.: 794 - 832MHz, EG1 / GG1 / -G1 ver.: 606 - 636MHz, RH1 ver.:576 - 606MHz
- Channel Selectable:160 selectable frequencies
- Receiving System: Double super-heterodyne
- Diversity system: Space diversity (digital diversity)
- MIC/LINE (selectable): -60dB (*1) (MIC) / -20dB (*1) (LINE), 600Ω phone jack (unbalanced), 600Ω XLR-3-32 type connector (balanced)
- Mixing Input: -20dB (*1), 10kΩ, unbalanced, phone jack
- Antenna Input: 75Ω, BNC (phantom powering for antenna), 9VDC, 30mA (max)
- Antenna Output: 75Ω, BNC (Gain 0dB)
- Contact Output: 1 channel, no-voltage make contact output, withstand voltage: 30VDC, control current 0.5A max, terminal block (2-pin)
- Receiving Sensitivity: 24dBµV or less (Bit error rate:1E-5 or less)
- Antenna Input Attenuator: 0dB / -10dB switchable
- Indicator: Audio (5 steps), RF (5 steps), ANT A / B, Audio (peak), Battery alarm
- Total Harmonic Distortion: 0.5% or less
- Frequency Response: 50Hz - 12kHz
- Function: Frequencies scanning, Feedback suppressor, Equalizer (optimizing each compatible microphone)
- Operating Temperature: -10°C to +50°C (14°F to 122°F), Operating Humidity: 30% to 85% RH (no condensation)
- ID Selectable: 10 patterns
- Finish: Resin, black